1060 coated aluminum coil
1060 coated aluminum coil is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Besides, our 1060 coated aluminum coil is relatively low strength, essentially pure aluminum alloy with many different tempers, such as O (annealed), H12, H14, H16, H18, etc.
► Features & Applications
Mirach Coating's 1060 coated aluminum coil has good corrosion resistance as well as poor machine-ability, and its machine-ability can be improved in harder (cold working) tempers, such as H16 and H18.
For its features above, 1060 coated aluminum coil has a vast application, such as cladding, indoor decoration, exterior wall decoration, household appliances panels, railroad tank cars, etc.
► Specifications
✔ AA 1060 O/H12/H14/H16/H18/H22/H28/H112/H24/H26
✔ Mirach Coating's Raw coil: Both DC and CC are available
✔ Thickness of our coated coil: 0.08~6.0 mm (normally 1.0~3.0 mm, tolerance ±3%)
✔ Max coating width: 2600 mm
✔ Hardness of 1060 coated aluminum coil: ≥1H for pencil test
✔ The painting thickness: PVDF ≥25mic; premier ≥5mic, PE paint≥18mic; tolerance ±0.002 mm
✔ Painting type: PE (polyester), PVDF, Nano PVDF, FEVE
✔ Paint brand: Normally PPG and Beckers or as requested
✔ Coated colors for 1060 coated aluminum coil: RAL, NCS, Pantone etc. and other color on request
✔ Guarantee for color coating: 15~20 years guarantee
► Adopted Standards
ASTM-B-209M, BS EN 485-2, BS EN 573-3, YS/T429.2-2000, GB/T3880-2008
► 1060 coated aluminum coil Chemical Composition
Grade |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Al |
1060 |
0.25 |
0.35 |
0.05 |
0.03 |
0.03 |
- |
- |
0.05 |
99.6 |
► Mechanical properties of 1060 coated aluminum coil:
TOLERANCE | |||||
Major Brand |
A1060(O) |
||||
Thickness |
0.2-0.4 |
0.4-0.8 |
0.9-1.1 |
1.2-1.6 |
1.8-2.0 |
tolerance |
±0.01 |
±0.015 |
±0.02 |
±0.025 |
±0.03 |
Width |
<100 |
100-200 |
201-500 |
501-1250 |
>1250 |
tolerance |
±0.1 |
±0.2 |
±0.2 |
±1 |
±2 |
BURR AND COLLAPSE | |||||
The width of aluminum belt |
burr's height |
collapsed side's height |
|||
<0.2 |
0.01 |
≥0.05-0.1 |
|||
0.2-1.0 |
0.015 |
||||
1.1-1.5 |
0.02 |
||||
>1.6 |
0.03 |
||||
MECHANICAL PROPERTY | |||||
U.T.S: 60-95N/mm2 |
Elongation: >25% |
||||
Density in 20°C: 2.703kg/dm3 |
Max. resistance in 20°C: ≤0.02825Ωmm2/m |
► Ordering & Packing for our 1060 coated aluminum coil
✔ Our MOQ: 5 MT/Spec
✔ Coil OD.: max. 1750 mm
✔ Packing: protection and wooden pallets with fumigation for seaworthy
✔ Essential details for inquiry: alloy, temper, coating thickness, color, sizes, and your end usage
http://www.mirachcoatedal.com/